Added workaround to use the standard MSR_IA32_MISC_ENABLE method to disable/enable turbo mode for newer Xeons (Haswell + newer).
Added check for system model "Google" when checking if running on virtual machine. Getting MSR data appears to crash on Google Cloud Computing VMs.
Added support for Intel Sunrise Point-LP SMBus.
Added support for Intel Braswell SMBus.
Added support for retrieving RAM SPD data on Intel Skylake-E chipsets.
Added support for temporary disabling of TSOD polling on Intel E5 v3 platforms.
Added workaround for retrieving the MMCFG base address on certain Intel Xeon E5 platforms.
Added workaround for crash when Adaptec RAID card is detected when enumerating PCI bus.
Changed to a time-based timeout when retrieving SPD data to increase performance.
Added sanity check for invalid characters in the RAM part number string.
Updated JEDEC manufacture ID list.
Added "Radeon Pro Duo" to video card lookup table.
Added RX 460/470/480 to video card lookup.
Added retrieval of compute units when available for AMD graphics cards.
Added support for retrieving NVMe SMART info in Win10.
Added check for 'SanDisk' in the model name and if detected do not perform byte order reversal.
Added check for 'THNS' (Toshiba) string in model name and if present, do not perform byte order reversal.
Added Transcend drives to model/serial number string byte order workaround.
不具合の修正
Fixed BSOD due to missing Intel performance monitor counters (eg. IA32_FIXED_CTR1) when measuring CPU turbo speed.
Fixed potential crash when measuring turbo speed on a Win2012 system.
Updated CPU specifications table for some AMD CPUs.
When measuring the cpu speed via the RDTSC method, only the first 2 CPU cores (rather than all cores) are measured to determine the max speed. For systems with large # of cores, this would have taken an extremely long time to measure the CPU speed for all cores.
Removed code to cycle through all cores to look up the APIC ID before reading the CPU core temperature.
Fixed bug retrieving exFAT boot sector info.
Disk 'ECC size' and 'Buffer size' are now reported as 'N/A' if the value is 0.
Fixed some possible errors when the number of disks reported on WinPE systems was too high causing performance issues.
Fixed potential crashes that could occur when writing debug output in 32-bit mode.